Installing a fasade kitchen backsplash can add an attractive, easy-to-clean accent wall to your kitchen. With some planning and the right materials, installing a fasade backsplash is a DIY project that can be accomplished in a weekend. Here is a step-by-step guide to installing a fasade backsplash in your kitchen.
Selecting the Right Fasade Backsplash
Fasade backsplashes come in a variety of materials like metal, glass, and acrylic panels. Consider factors like:
- Durability – Fasade is more durable than tile and resistant to moisture. Metal and glass will be most durable.
- Ease of cleaning – Non-porous fasade backsplashes like glass or acrylic wipe clean easily.
- Cost – Acrylic and metal fasade is budget-friendly. Glass costs more but has a high-end look.
- Style – Fasade comes in different colors, finishes like brushed metals, and even can be custom printed.
Once you’ve selected the right fasade material for your kitchen, purchase panels to cover the entire backsplash area. Measure carefully to get the right amount.
Preparing the Backsplash Area
Prep is crucial for proper fasade panel installation:
- Remove existing backsplash if there is one and prepare the surface. Scrape off any adhesive or debris.
- The backsplash area must be smooth, clean, and dry for fasade panels to adhere properly.
- Fill any holes or imperfections with spackle and sand smooth.
- Clean the backsplash area thoroughly with rubbing alcohol to remove grease, soap film, or any other residues.
Proper prep prevents your new fasade backsplash from having adhesion issues down the road.
Applying Adhesive to Backsplash Area
Fasade panels use high-strength panel adhesive to adhere directly to the backsplash surface.
Follow adhesive instructions carefully:
- Choose the recommended trowel size to achieve proper adhesive thickness.
- Hold trowel at 45-degree angle to spread adhesive evenly over the entire backsplash area.
- Only cover sections where you can immediately place fasade panels to prevent adhesive from drying or skinning over.
Applying adhesive properly ensures maximum strength holding your backsplash panels in place.
Installing the Fasade Backsplash Panels
Once adhesive is spread, it’s time to install the fasade panels:
- Cut panels as needed to fit your backsplash design using a circular saw with fine tooth blade.
- Place the first panel in the top left corner. Press firmly across the entire panel surface.
- Use a J-roller across the panel to ensure strong adhesion free of air bubbles.
- Install panels from left to right and top to bottom, overlapping edges slightly.
- Continue rolling each panel after placement to maximize bond.
Take care to keep panels aligned and overlap seams properly. Remove any adhesive squeeze-out immediately with a damp cloth.
Once all panels are securely in place, complete your fasade backsplash installation:
- Let adhesive fully cure for 24-48 hours before use and cleaning.
- Use silicone sealant along the top and side edges for a waterproof finish.
- Seal any gaps between panels, around corners, and around fixtures.
- Enjoy your new, easy-to-clean fasade backsplash!
With proper planning and preparation, installing a fasade backsplash can give your kitchen an instant facelift. Maintain it by cleaning with a soft sponge and mild soap and water. Repair any chips or damage promptly to prevent moisture getting behind the panels.
Frequently Asked Questions About Installing Fasade Backsplash
What tools do I need to install a fasade backsplash?
You’ll need basic tools like a tape measure, level, circular saw, J-roller, caulk gun, trowel, and clamps. Have rags, cleaning supplies like alcohol, and silicone sealant on hand too.
What’s the best adhesive for fasade backsplash panels?
Use a high-strength panel adhesive specifically designed for foam backsplash panels. Liquid Nails and Loctite both make suitable adhesive products.
How do I cut fasade backsplash to fit my space?
Use a circular saw with a fine-toothed blade suitable for cutting acrylic/metal. Mark your measurements and use a straightedge as a guide. Cut panels face up.
Should the fasade panels overlap?
Yes, overlapping panels about 1/4 inch will give you a continuous look. Don’t butt panels tightly end-to-end or gaps may appear over time.
How long does fasade backsplash adhesive take to fully cure?
Adhesive usually takes a full 24-48 hours to cure and gain maximum strength. Avoid cleaning or putting weight on the backsplash during this time.
Installing a fasade backsplash is a relatively easy DIY project that can give your kitchen an updated, eye-catching look. With the right planning, materials, and adherence to preparation and installation steps, you can achieve a successful, long-lasting fasade backsplash. Pay close attention to cleaning and prepping the area, applying adhesive properly, and thoroughly sealing edges. In just a weekend, you can enjoy a beautiful, low-maintenance fasade backsplash.